CHOPPER II #69-4 by Northwest Shortline
Rated 4/5 based on 6 reviews.
$109.00
RRP $119.00
SAVE $10.00 (8%)
The Chopper II by NorthWest Short Line uses a common, easy-to-replace single-edge razor blade to make clean mitre cuts. Rigid, die-cast aluminium construction assures high accuracy and repeatability. You can re-position the self-healing mat to compensate for wear, or replace it entirely. Includes precision mitre guides for 30, 45 and 60 degree angles. The functional design allows for right or left handed use.
Fits your workspace only 180mm x 180mm (7"x 7")
- Replaceable cutting mat for cleaner cuts
- Cutting depth of 6.35mm (1/4") maximum
- Cuts all model building woods, plastics and styrene
- Right-hand or Left-hand operation;
- Diecast aluminium frame, light (under 2 lb.) and strong
- Cuts mitres of any angle
Precision guides for common angles -30, 45, 60 degrees. Safer, with more accurate repeatability. Rigid handle mount system assures greater accuracy, repeatability of cuts and more safety no loose handle that can slip or flip into unsafe position exposing cutting blade.
Wood and Styrene Cutter
Extra Blades suit Chopper - #4915-4 Single edge repl. blades (5)
(69-4)
| SKU | 69-4 |
| Brand | NWSL |
| Shipping Weight | 0.8500kg |
| Shipping Width | 0.320m |
| Shipping Height | 0.330m |
| Shipping Length | 0.050m |
| Shipping Cubic | 0.005280000m3 |
very happy
By: Steve on 5 June 2015Excellent tool for model trains layout. Great service. Thank yo.
(5)
still under review
29 May 2015Although I haven't put it through it's paces, what use I have given it, has been very pleasing so far.
(4)
Good product; makes repetive cutting a breeze
By: Charles Faulkner on 4 June 2014This is a well engineered, high quality product. Works well on stripwood and balsa. On styrene, the cuts are less precise, as the blade tends to twist slightly on the harder material. I work in N scale, though, so I am dealing with very small pieces requiring extreme precision. The Chopper I has been around forever and the Chopper II is a great improvement, especially the replaceable cutting surface. Only thing I would improve is to allow the cutting arm to swing up a bit more to allow extra space to clear cut material.
(4)
Chop-sticks and chop-styrene.
By: Steve Potter on 26 May 2014The Chopper II is a fantastic product for scratch building models. It allows you to cut multiple pieces of the same length material; simply set the jig to the correct mitre and/or length and start cutting. A good clean cut every time and it's very easy to replace the single edge razor blade. I wouldn't be without the Chopper II for my modelling work.
(5)
CHOPPERS
By: J GLeeson on 1 April 2014UP TO THE HIGH STANDARDS OF NWSL-WELL ENGINEERED, AND USEFUL AS INTENDED-QUICK PRODUCTION OF REPETITIVE PLASTIC COMPONENTS
(4)
