Milliput standard putty yellow/grey


Standard grey putty is a two part epoxy pack weighing 113g. Use for scratch building, sculpting, repairing, gap filling, pattern making and customizing. Ideal for military miniatures, railway, farm, ship model parts, dollhouse accessories and plastic models. It can be used for repairing, modelling and sculpting. (Can also be used as a gap filler for car bodies, in plumbing and also caravan and boat repairs.)
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
After setting hard Milliput continues to cure and is fully cured after more than five hours. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set.
Carving tools for wax and epoxy putty