The Original Right Clamp

The Original Right Clamp was designed for the critical work of precicely assembling HO cast resin freight car kit bodies.  The jaw length of 38mm (1-1/2") makes the clamp very usefull for smaller assembly jobs.  End Screws adjust Clamping Tubes to provide uniform pressure over the length of the clamp.  A 25mm (1") long Base Angle Notch allows location to apply glue to inside corner of the jointand adding corner stiffeners.  Can also be used for joining other materials up to 7.93mm (5/16") thick.

One of the benifits of the 13mm (1/2") base angle is the ability to clamp in confined spaces.  One photo shows 4 clamps holding 4 freight car walls atop the car roof for simultanious gluing.  Other photos also show Original Right Clamps holding a wood bulkhead framework and holding trestle bents upright for gluing.

• Jaw Langth: 1.5" (38mm)
• Overall Length: 2.1" (74mm)
• Base Angle Size: 0.5" (13mm)
• Max Jaw Opening: 5/16" (8mm)
• Weight: 1.63 oz (46g)

Jaw Length in Scale Feet:

• N Scale: 160/1, 20 scale feet
• HO Scale: 87/1, 11 scale feet
• S Scale: 64/1, 8 scale feet
• O Scale: 48/1, 6 scale feet
• G Scale: 22/1, 2.75 scale feet