NWSL HO/S "The Quarterer" Steam Loco Driver Alignment Tool

$89.98
RRP $99.88
SAVE $9.90 (10%)
In Stock


Calculate Shipping

Quartering is the term for setting crankpins of locomotive drivers at 90 degrees ‘crank’ apart (similar to an automobile crankshaft). Accurate quarter of all drivers in a set to the same angle (whether exactly 90 degrees or not) is critical for smooth operation of model locomotives. This economical yet precision tool enables quick, accurate quartering of HO and S size drivers up to 25mm O.D. on 3.2mm or 3mm axles. The wheel is located onto the axle while the wheelset is securely held in the tool avoiding possibility of slippage while wheel is pressed on with arbor press or similar. Can also be used to compare quarter of existing driver sets.

Operating suggestions included. Designed by Larry Richards for your modeling pleasure. HO-S-On

INDEX PINS INCLUDED  0-80 & 1/16-60W

(44-4)

SKU 44-4
Brand NWSL
Shipping Weight 0.1000kg
Shipping Width 0.070m
Shipping Height 0.080m
Shipping Length 0.070m

More From This Category


2.0 x 5mm x 0.4 Countersunk Machine Screws (100/pkg)
8% OFF RRP $21.70
DETAIL SANDER 400 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
On Sale 24% OFF RRP $6.65
The Puller III - Large

The Puller III - Large

$109.00

16% OFF RRP $129.00
4914-4 Extra HANDLE assembly for CHOPPER I, III
10% OFF RRP $44.38
Single Edge Repl. Blades (5)

Single Edge Repl. Blades (5)

$2.50

16% OFF RRP $2.98
The Duplicutter II NWSL

The Duplicutter II NWSL

$98.00

10% OFF RRP $109.00
Sanding Strip Assortment For #84048 Sand-It
On Sale
DETAIL SANDER 320 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
On Sale 24% OFF RRP $6.65
NWSL 45-4 HO Scale The Puller Tool
10% OFF RRP $76.59
The Puller II

The Puller II

$69.00

10% OFF RRP $76.59