TABLE SAW (FET)

The micro-adjustable, precise and stable length limit stop provides decisive advantages: corrections as small as 1/10mm can be made using an adjusting screw after coarse adjustment. The sawblade, which can be pivoted by 45 degrees, makes the cutting of double mitres possible when used with the angle stop.

Low-noise drive using DC special motor with Optibelt toothed belts. Ball-bearing sawblade shaft, hard metal-equipped saw-blade. Additional workpiece pusher and non-slotted polycarbonate sawing gap cover for tight tolerances between sawblade and table are included.

Reference guide to the numbers on image.

1. Extendable table extension with integrated auxiliary stop.
2. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
3. Saw blade protection runs up automatically when sawing.
4. Clamping screw for height adjustment and pivoting the hard metal-equipped sawblade.
5. Scale helps when adjusting the longitudinal stop!
6. Setting screw for fine adjustment of longitudinal stop by 1/10mm.

Angle stop with stop rail of aluminium and adjustable limit stop for manufacturing parts of equal length and the same angle.

Included components:

• 36-tooth tungsten carbide tipped blade

Technical specifications

• 220-240V
• 7000 RPM, 200 watts
• Mitre infinitely adjustable up to 45 degrees
• Table size 300mm x 300mm
• Cutting depth 1-22mm
• Sawblades between 50 and 85mm can be used
• Weight approximately 6kg