Filter Regulator with Moisture Trap and Gauge

This is an in-line filter regulator with a 150 PSI gauge and also includes a moisture trap.

This regulator gives user control of operating pressure as well as assisting in furnishing clean, dry and regulated air.

Operation:
1. The gauge is used to show the working pressure of your airbrush
2. Pull the top button up; turn clockwise to increase the pressure; turn counter-clockwise to release the pressure.
3. Push the bottom needle to release the water.

The two outlets are both 1/4'' BSP female and there are two male adaptors included:

• 1/4"  x 1/8" male BSP
• 1/4"  x 1/4" male BSP