Mini airbrush filter
Rated 5/5 based on 2 reviews.
$9.87
RRP $13.53
SAVE $3.66 (27%)
In Stock
Mini airbrush filter
Atteches directly onto the airbrush, the mini filter is the last defense for delivery of clean, dry air to the airbrush. Miniature in size, the super-fine mini filter will give optiman performance for your airbrush work.
The clear filter bowl allows a visual inspection of built-up moisture and can be released through a spring-loaded release valve – without taking the filter off the airbrush.
Small and comfortable in the hand, this mini filter acts as a handle on the airbrush to also relieve muscle tension.
Fitting size:
- 1/8" BSP female - airbrush end
- 1/8" BSP male - hose end
Will suit Iwaata, Sparmax, Artlogic and airbrushes with standard 1/8" BSP fitting. Will also suit Paasche, Badger and Aztec with the correct adaptor.
(HS-F4)
| SKU | HS-F4 |
| Shipping Weight | 0.1000kg |
| Shipping Width | 0.070m |
| Shipping Height | 0.080m |
| Shipping Length | 0.070m |
Excellent Product
By: Christopher on 10 July 2014This is an excellent "last line of defence" to prevent moisture ruining your work. I have always used a moisture trap on my compressor, but, after extended periods of time (30+ minutes) moisture would eventually prevent me continuing. I've now added this as a last line of defence and managed to spray for 60+ minutes without an issue. Highly recommend this product.
(5)
Filter/Moisture Trap - for SparMax 35
By: Peter on 14 March 2013Tried this out on the weekend, on a very humid day, outdoors, Performed fantastically! Tattooed all day, with no problem, cleared the trap several times but never any issue to flow. Extremely satisfied.
(5)
