Precision Micro Drill Chuck for Cordless Screwdriver .3 - .85mm
Rated 5/5 based on 1 reviews.
$28.98
RRP $31.50
SAVE $2.52 (8%)
Special Chuck Fits Cordless Screwdrivers for Slow Speed Drilling
Also works as an adapter for your oversized drill chuck, quickly converting it for precise drilling with micro size bits.
Most drills and rotary tools spin too fast for working in plastic and for tiny detail work. This Special chuck has 1/4 inch hex shank that fits your slow turning cordless screwdriver to solve this problem. Take advantage of the quick-change feature of the 1/4 inch shank...buy several chucks and keep your most-used drill bits in these and ready to go.
Holds drill bits from .35mm - .85mm (#80 to #66)
(82541)
SKU | 82541 |
Brand | HTA |
Shipping Weight | 0.0500kg |
Shipping Width | 0.060m |
Shipping Height | 0.060m |
Shipping Length | 0.060m |
Save time - and your fingers
By: MadRam on 20 July 2014Using a pin-vise to hold and use micro-drills is fine for one or two holes, but when you have a number of holes to do this little chuck is a real timesaver. Not to mention being a lot easier on the fingers and hand! I have successfully used the micro-chuck with drills down to #80 (0.34mm), fitted to a Bosch IXO 3.6V Li-Ion Cordless Screwdriver. This screwdriver has a nice low speed so you can drill with a lot of control and less risk of breaking the drill bit. If you do a lot of drilling with micro-drills, it’s worth having a couple of these chuck so you can leave your favourite drill bits in them and always have them ready to hand.
(5)