Zap Cyanoacrylate Debonder 1oz

Rated 5/5 based on 1 reviews.
$5.98
RRP $7.50
SAVE $1.52 (20%)
In Stock


Calculate Shipping

Z-7 DEBONDER works to remove cured CA glues from skin, work surfaces, most plastics, and model finishes. Z-7 DEBONDER can also be used to remove adhesive left from stickers, pen and marker inks, some paints and stains, decals, correction fluids and finger nail polish. You can use Z-7 DEBONDER to weatherize and highlight your models and soften CA glue prior to sanding.

Helpful Hints: 
Z-7 DEBONDER Is best applied directly from the bottle right onto the glue to be removed. Z-7 DEBONDER works by softening the glue so it can be wiped away. Several applications may be necessary to completely remove all of the glue. To remove from your fingers or other body parts, apply Z-7 DEBONDER directly on the glue let it sit for a minute or so, rub the area with your finger, wipe away the softened glue and apply additional Z-7 DEBONDER if needed. If your fingers are glued together apply Z-7 DEBONDER all around the area glued, let it work on the glue for a minute or so, then gently roll your fingers to loosen the glue, apply more and continue working the glued area until yours fingers separate. To remove from a surface, apply directly to the glue and let sit for several minutes, wipe away the softened glue and repeat the application if required. To weather your model apply debonder to a rag first and gently wipe the painted areas you wish to look worn. Although Z-7 DEBONDER will work on most materials and paints, always test on samples for compatibility.

 

 

(PT16)

SKU PT16
Brand ZAP
Shipping Weight 0.0500kg
Shipping Width 0.060m
Shipping Height 0.060m
Shipping Length 0.060m

Super Glue has met its match

By: on 26 May 2014
The Zap debonder works well for that stubborn, dried CA on my work equipment. I use CA in most of my modelling work and it's inevitable that dobs and blobs get on the equipment and over the work area; Z-7 does the best and the quickest job to remove the unwanted and immovable glue. Z-7 is an A1 product.
(5)

Write a product review


Others Also Bought


Woodcarving blade #106 (2pc)

Woodcarving blade #106 (2pc)

$5.48

24% OFF RRP $7.21
Tweezer set 4pc

Tweezer set 4pc

$10.98

13% OFF RRP $12.65
Hot wire foam cutter - hand held - HOTWIRE
7% OFF RRP $27.00
ZAP 2oz  Zip Kicker® (CA Accelerator)
16% OFF RRP $12.50
12 pc Wax Carving, Pick and Spatula Set
18% OFF RRP $27.50
CRAFT KIT - MICROMESH

CRAFT KIT - MICROMESH

$32.98

6% OFF RRP $35.22
Stainless Steel rule 30cm/12"

Stainless Steel rule 30cm/12"

$3.39

42% OFF RRP $5.82
Surface Planer AH 80 - 27044

Surface Planer AH 80 - 27044

$665.00

Woodcarving blades assorted 5pc

Woodcarving blades assorted 5pc

$11.98

17% OFF RRP $14.49

More From This Category


Z-42 Thread Locker

Z-42 Thread Locker

$4.91

Thin CA 2oz 56g

Thin CA 2oz 56g

$17.98

20% OFF RRP $22.50
Glue Syringes and Needle Ends

Glue Syringes and Needle Ends

$23.50

9% OFF RRP $25.75
ZAP 2oz ZAP® Foam Safe CA Kicker (CA Accelerator)
16% OFF RRP $13.02
Pipettes pack of 10 - Small 1ml
18% OFF RRP $6.05
Model Lite Balsa - Lightweight filler
12% OFF RRP $22.79
Testors Cement for Metal and Wood 18ml Tube
14% OFF RRP $6.38
10 Z-ENDS & TEFLON TUBING

10 Z-ENDS & TEFLON TUBING

$4.98

31% OFF RRP $7.25