Hull Planking Clamp Set (4.8mm And Larger)

HULL PLANKING CLAMPS - 4.8mm (3/16") Bulkheads and larger - Set of 6

Hull Planking Clamps
 

Laser cut plywood planking clamps eliminate unsightly holes in you bulkheads, and you won't waste time screwing in and removing threaded planking clamps. They also hold you planks firmly in place while you glue, drill, measure and taper.

Each clamp is 1" square, and includes a metal screw with wing nut and two 1/16" diameter brass support rods. 

Clamps onto bulkheads 4.8mm (3/16") or thicker.

Please Note: Assembly is required.