Proxxon MICRO Woodturning Lathe DB 250Rated 5/5 based on 1 reviews.
Motor 220 - 240V. 100W. 50/60Hz. Centre distance of 250mm, 40mm swing. 25mm swing over support. Variable speed control covering between 1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tailstock travel 20mm. Includes 6 collets (2 - 3 - 4 - 6 - 8 - 10mm), drive centre, live centre and face plate.
Powerful drive motor with speed control between 1,000 and 5,000rpm.
The bed is made from stable, thick-walled aluminium profile.
Ball bearing spindle is bored through at 10mm. For series production of small parts.
Square carrier with back centre and 10mm shaft.
The stable tool rest is adjustable in all directions.
Tailstock with quill travel.
A face plate (for turning larger work pieces) is included.
- Five Piece Turning Chisel Set.
1 x tube chisel
1 x flat chisel
1 x pointed chisel
1 x anvil chisel
1 x finishing chisel
- Independent Four Jaw Chuck.
Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35 mm (inside) and 14 - 67 mm (outside). The headstock spindle of thread M16 x 1 screws directly into the chuck.
- Three Jaw Chuck (used for concentric clamping)
- Drill chuck with sliding sleeve (for the tailstock of the DB 250)
Clamps up to 5.0 mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
- Pen Mandrel
6.5mm shank Pen Mandrel to suit Proxxon wood lathe with 6.5mm collet
Fully performes as indicated and easy to useBy: Ron Jefferies on 7 March 2013This Lathe is idealy suited to small work,in my case small bud vases and lace bobbins. So ould be well suited for all levels of modeling.