Motor 220 - 240V. 100W. 50/60Hz. Centre distance of 250mm, 40mm swing. 25mm swing over support. Variable speed control covering between 1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tailstock travel 20mm. Includes 6 collets (2 - 3 - 4 - 6 - 8 - 10mm), drive centre, live centre and face plate.
Powerful drive motor with speed control between 1,000 and 5,000rpm.
The bed is made from stable, thick-walled aluminium profile.
Ball bearing spindle is bored through at 10mm. For series production of small parts.
Square carrier with back centre and 10mm shaft.
The stable tool rest is adjustable in all directions.
Tailstock with quill travel.
A face plate (for turning larger work pieces) is included.
NO 27 020
Five Piece Turning Chisel Set.
1 x tube chisel
1 x flat chisel
1 x pointed chisel
1 x anvil chisel
1 x finishing chisel
NO 27 023
Independent Four Jaw Chuck.
Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35 mm (inside) and 14 - 67 mm (outside). The headstock spindle of thread M16 x 1 screws directly into the chuck.
NO 27 024
Three Jaw Chuck (used for concentric clamping)
Made from zinc diecast and offering 1.5 to 32 mm and 12 to 65 mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 spindle.
NO 27 026
Drill chuck with sliding sleeve (for the tailstock of the DB 250)
Clamps up to 5.0 mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Be The First To Review This Product!
Help other Hobby Tools Australia users shop smarter by writing reviews for products you have purchased.