Ultimate Proxxon 12V Hobby Tool Kit

$369.00
RRP $420.03
SAVE $51.03 (12%)
Sold Out


Calculate Shipping

Ultimate Proxxon 12V Hobby Tool Kit

Look no further when deciding which tools you need for your workspace, with this all in one 12V tool kit.

This kit includes the Proxxon Pensander, the Proxxon 60 Precision Drill, the Proxxon Micromot Mains Adapter 5A NG 5/E, as well some other accessories for these tools.

Proxxon Pensander

The superfine sander with linear sanding motion (as opposed to rotary or orbital) operates at 8,000 strokes per minute with a 2.5 mm stroke. Stable housing of fibreglass reinforced POLYAMIDE. It is ideal for surfaces, slots, and tight corners. Four sanding arbors of different shapes as well as 3 sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet. The self-adhesive sanding sheets come in: Square, triangle, round and rounded rectangle - They measure all under 25mm (28594). This kit also comes with extra sandpaper sheets in 180 grit, 240 grit and 400 grit. Three sheets of each with 20 self-adhesive pads. (28822, 28824, 28826)

Proxxon Precision Drill Tool Micromot 60

With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound. High-quality MICROMOT steel collets ensure accurate clamping of even the smallest shafts, without rattling or vibrating of bits and cutters. This tool lends itself to hundreds of processes, from milling, drilling, grinding, polishing, brushing, cleaning, de-rusting, cutting, engraving, and signing, to working with steel, precious metals, glass, ceramics, plastics and precious stones. The fine nature, ergonomics and flexibility of cutters makes this tool ideal for electronic hobbyists, model builders, mechanics, jewelers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc. The 12V supply allows the safe use of coolant for wet grinding and cutting. (28500)

Technical specifications: 

  • speed: 20,000rpm
  • maximum power consumption: 40W
  • 20mm Micromot-system collar
  • glass-fiber reinforced polyamide housing
  • mass: 230g
  • length: 220mm

Proxxon Micromot Mains Adapter 5A NG 5/E

With a variable speed control and safety thermal overload trip, this supply has onboard sockets for up to three 12V Proxxon tools, and a separate output available through banana sockets. The supply has an overtemperature shut down and can be power cycled to reset it after it has cooled. A red LED indicates when it's ready for use, and a master switch on the front panel turns off the internal transformer. Features include a folding tool rest on the side, and sizeable top rack for holding 2.35mm and 3mm shank bits and cutters. (28704)

Power consumption of Proxxon portable machine tools is measured according to the internationally accepted ICE-745-1 specification. All Proxxon mains adapters are suitably rated for the recommended tools.

Accessories Included

Cutting/Sanding/Polishing Bit Set (13pc) - This thirteen-piece set for model makers has tools for cutting, milling, polishing, and drilling. The set includes fine ball and cylindrical mills, ball and conical corundum grinding bits, cutting discs, drills, and an arbor. Included components: 1 x 2.3mm ball mill, 1 x 2.3mm cylindrical mill, 1 x 5mm conical corundum grinding bit, 1 x 5mm cylindrical corundum grinding bit, 1 x 1.0mm drill, 1 x 2.3mm drill, 1 x 22mm spring steel cutting blade, 5 x 22mm cutting discs, 1 x 2.35mm arbor. Technical specifications: 2.35mm shaft diameter. (28910)

Cutting/Sanding/Polishing Bit Set (10pc) - This complete polishing set is for finishing of metals, glass, high quality alloys, porcelain, and plastic. It consists of three felt polishing bits, three silicon polishing bits, and a cotton wool polishing wheel, chamois buffing wheel, a tray of polishing paste and an arbor. Included components: 1 x 7mm felt cylindrical polisher, 1 x 8mm felt conical polisher, 1 x 16mm felt wheel polisher, 1 x 5mm flexible bullet silicon polisher, 1 x 14mm flexible cylindrical silicon polisher, 1 x 22mm flexible disc silicon polisher, 1 x 2.35mm arbor, 1 x 22mm cotton wool wheel polisher, 1 x 22mm chamois wheel buff, 1 x polishing paste tray. Technical specifications: 2.35mm shaft diameter. (28285)

 

 

 
 

(28704KIT)

SKU 28704KIT
Brand Proxxon
Shipping Weight 2.2000kg
Shipping Width 0.400m
Shipping Height 0.400m
Shipping Length 0.300m
Shipping Cubic 0.048000000m3

Be The First To Review This Product!

Help other Hobby Tools Australia users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



Others Also Bought


Proxxon MICROMOT Mains Adapter NG 2/S #28706
3% OFF RRP $83.90
ALUMINIUM SHEET 102mm x 254mm x 1.63mm
18% OFF RRP $9.55
Nail Nailer

Nail Nailer

$23.98

5% OFF RRP $25.25
Pyro-Pen Dual ND1 for Wood  - Australian Made
9% OFF RRP $469.28
Proxxon Cut-Off Saw KG50

Proxxon Cut-Off Saw KG50

$246.17

1% OFF RRP $248.00
Proxxon MICRO Woodturning Lathe DB 250
1% OFF RRP $375.14
Dremel 3 Jaw Chuck #4486

Dremel 3 Jaw Chuck #4486

$24.98

PROXXON Bench Drill Machine TBM220 #28128
0% OFF RRP $398.00
Proxxon Scroll Saw DS 230/E

Proxxon Scroll Saw DS 230/E

$319.00

3% OFF RRP $328.10
Proxxon MICROMOT 12 V drill/grinder 60/E Model Building and Engraving Set
4% OFF RRP $186.00
Micro-Mesh sheets 75mm x 150mm - 1800 grit (1 pc)
16% OFF RRP $5.95

More From This Category